Capacity: 15kWh (3x5kWh)
7500W On Grid output, Plug & Play
Peak Shaving / SelfConsumption*
Max 2500W Off Grid / batterie
Plug In 220V Battery per batterij (3x230)
Battery Cell:LifePO4
P1 Energie Meter Included

Protects roof covering Compatible with PVC, EPDM, and Bitumen coverings 1100 x 100 x 10 mm Density: 250 kg/m³

The 51.2V/6.5kWh low-voltage battery from APsystems AMPACE is distinguished by its charge and discharge performance and a long associated cycle life. With automatic energy management functions based on intelligent and integrated software, the BMS monitors the battery's operating status and generates alarms to prevent out-of-limits operation. Up to 8 batteries can be connected in parallel to increase the energy and power of the energy storage system. The AP battery communicates with the PCS via the integrated CAN network port.

Model: AMPACE 6.5
Unit capacity: 6.5 kWh
Nominal voltage: 51.20V
Depth of discharge (DoD): 94.50%
LiFePO4 technology
IP55
10-year product warranty

Bebat bijdrage 56 kg x 2,39 € = 133,84 € included in tax.

DC verlengkabel 2m DC verlengkabel MC4 (Staübli) om de afstand tussen de modulekabel en de micro-omvormerinvoer (alle series) te verlengen.

Extension de garantie de 10 ans vers 20 Ans
N° de serie du DS3 à mentionner

ELS-5K BATTERY CHARGERS
Grid-connected system with AC coupling
PV off-grid function (backup)
Connects to multiple 48V battery units
Several energy control modes: Backup, Self-consumption, 'Peak-Valley'

SEE ATTACHED DOCUMENT FOR COMPATIBLE BABTTERIES

TRIPHASE LV RETROFIT CHARGERE
ELT12K BATTERY CHARGERS
Grid-connected system with AC coupling
PV off-grid function (backup)
Connects to multiple 48V battery units
Several energy control modes: Backup, Self-consumption, 'Peak-Valley'

Model: AC Power Cord
Single-phase connection cable for EZ1 microinverter to 230V AC outlet
Length: 5m
Equipped with a 'Schuko' type 230V plug at the end, ready to use
Section: 1.5 mm²

AC T Connector (3C, 17.5A) to connect additional EZ1-M
units on power cord

Model: EZ1-H
Duo // Single-phase 230V
AC output power: 960W
A microinverter connects two PV modules
Special DIY product, up to 4 modules max per installation, limited beyond that!
2 MPPTs
Maximum reliability, IP67
Integrated VDE relays
12-year product warranty

Reference: DC caps female
Protective DC cap for unused MC4 connector on an APsystems microinverter

Extension de garantie de 10 ans vers 20 Ans
N° de serie du QT2 à mentionner

Model: Wifi Booster
Boosts the Wi-Fi signal (between the internet router and the ECU gateway) or Zigbee signal (between the ECU gateway and the micro-inverters).
Powered by 230V with plug included.

Zwarte 25MM DC Cable
Dubbel geïsoleerd
Extreem Flexibel
Prijs per mtr

Energiemeter met real-time monitoring
· Eenvoudig te installeren, geschikt voor de meeste thuisverdeelkasten
· Ondersteunt Bluetooth/Wi-Fi verbinding met slimme App
· Betere compatibiliteit met Venus producten
· Bemonstering van driefasig vermogen, ook toepasbaar voor eenfase

Product Model DH200Y
Battery Type LFP (LiFePO4)
Nominal Capacity 232kWh
Dimension (W*D*H) 1055*1645*2398mm
Weight 2600±100kg
Ingress Protection IP55
Max. Number Of Parallel Expansions 10

LV Home Storage 5kWh
Battery Type LiFePO4
Nominal Battery Energy 5.12 kWh
Net Weight 49.9 kg
Dimension[W*D*H] 558*545*150 mm
Cycle Life ≥6000 Cycles
Protection Level IP20
Expansion Up to 50 units in parallel

BMS unit for Dyness Tower

HV Home Storage 3.55kWh
Battery Type LiFePO4
Dimension[W*D*H] 558*545*150 mm
Cycle Life ≥6000 Cycles
Protection Level IP20
52,5kg
up to 6 units -> 21.31 kwh

The EcoTracker P1 from everHome is the perfect solution for monitoring and managing your home's electricity consumption. The EcoTracker P1 connects to your meter and continuously sends data to the everHome platform, where you can track your electricity consumption in real time. Thanks to easy integration with everHome, you can link the EcoTracker P1 data with other smart devices in your home for efficient energy management. You can also view and manage your consumption data in the free everHome app, available for iOS and Android.

Requirements:
Router with DHCP.
Internet connection required.
iOS version 11 or higher.
Android version 5.0 or higher.

Package includes:
1 x EcoTracker P1.
1 x USB-C power adapter.
1 x RJ12 cable.

Compatible : Marstek - AP Systems - Zendure